SMC Networks TigerStack 100 1000BASE-X Management Manual page 146

W -B M
EB ASED ANAGEMENT
Use the Port Trunking Configuration screen to set up port trunks as
shown below:
Parameter
Trunk
Status
Member List
3-52
Description
A unique identifier for this trunk. You can configure up to
five trunks per switch.
Enables or disables the displayed trunk.
You can create up to 12 trunks for the entire stack by
specifying the trunk identifier, switch unit and port number,
and then pressing the "Add" button. Each trunk can contain
from 2 to 4 ports.