SMC Networks TigerStack 100 1000BASE-X Management Manual page 93

Menu
Status
Sorted by
[Show]
[More]
[Set]
Description
The status for an entry can be set to:
Permanent
DeleteOnReset
Invalid
DeleteOnTimeOut This entry is currently in use and
Other
Selects the primary sort key for displaying table entries.
Note that only VID+MAC is implemented in the
current firmware release.
Displays the static address table sorted on VID as the
primary key and MAC address as secondary key.
Scrolls through entries in the static address table.
Adds the specified entry to the static address table, such
as shown in the following example:
VID : 1
Unit : 1
Status : Permanent
M
ONITORING THE
This entry is currently in use and
will remain so after the next reset
of the switch.
This entry is currently in use and
will remain so until the next reset.
Removes the corresponding entry.
will remain so until it is aged out.
(Refer to "Aging Time" on page
2-71.)
This entry is currently in use but
the conditions under which it will
remain so differ from the
preceding values.
MAC : 00-00-00-e8-34-22
Port: 1
S
WITCH
2-75