SMC Networks TigerStack 100 1000BASE-X Management Manual page 22

U S
SING THE YSTEM
Menu
Management Setup Menu
Network Configuration
Serial Port Configuration
SNMP Configuration
Console Login
Configuration
TFTP Download
Configuration Save
& Restore
Management Configuration Specifies if management access to the switch is
Device Control Menu
Port Configuration
Port Information
Spanning Tree Configuration Enables Spanning Tree Algorithm; also sets
Spanning Tree Information Displays full listing of parameters for the Spanning
Port Mirror Configuration
Port Trunking Configuration Specifies ports to group into aggregate trunks.
IGMP Configuration
2-4
C
ONFIGURATION
Description
Includes IP setup, Ping facility, HTTP (Web agent)
setup, Telnet configuration, and MAC address.
Sets communication parameters for the serial port,
including management mode, baud rate, console
time-out, and screen data refresh interval.
Activates traps; and configures communities and
trap managers.
Sets user names and passwords for system access, as
well as the invalid password threshold and lockout
time.
Downloads new version of firmware to update your
system (in-band).
Saves the switch configuration to a file on a TFTP
server. This file can be later downloaded to restore
the configuration.
available from all VLANs or restricted to one
VLAN.
Enables any port, enables/disables flow control,
and sets communication mode to auto-negotiation,
full duplex or half duplex.
Displays operational status, including link state,
flow control method, and duplex mode.
parameters for hello time, maximum message age,
switch priority, and forward delay; as well as port
priority, path cost, and fast forwarding.
Tree Algorithm.
Sets the source and target ports for mirroring.
Configures IGMP multicast filtering.
P
ROGRAM