SMC Networks TigerStack 100 1000BASE-X Management Manual page 83

Parameter
Mode
[Apply]
MAC
[Add]
[Delete]
[Clear]
Description
Port security can be set to three states; Static, Disable, or
Learning. When set to Static, the switch will drop packets
from the port if the source MAC address does not match one
of the addresses in the MAC Address list. If set to Learning,
the switch will add the source MAC address of all packets
received on the port to the authorized MAC Address list.
Applies a change of Mode to the port.
A specific MAC address to be added or deleted from the list.
A MAC address must be entered as 12 hexadecimal digits in
the format "00-00-00-00-00-00", otherwise the entry will not
be accepted by the system.
Adds a new MAC address to the current list.
Removes a MAC address from the current list.
Clears all the MAC addresses for the current port.
C
ONFIGURING THE
S
WITCH
2-65