Ericsson BusinessPhone 50 User Manual page 55

-
activate
caller
trunk
return
reset
print
BusinessPhone – Executive Telephone
In case of a typing error, press to delete the latest entered
digit.
Press to confirm the password (see display)
Select the type of meter you want to read out.
12 May 10:35
SELECT TYPE OF METER
caller
Press to read out an extension counter (see display)
If the system is included in a network, you will be able to read out
the costs of the tie lines in this menu.
or
Press to read out a trunk line counter (see display)
12 May 10:35
ENTER DIRECTORY NUMBER:
display
z
Enter the directory number of the desired extension or trunk
line
(If you do not enter a directory number the accumulated costs of
the entire system will be shown.)
Press to return to previous menu (see display)
Press to reset counter (see display)
Note: The reset function in this menu is only applicable
when a printer is connected to the system. To initiate a reset
procedure you require a special class of service (please ask
your system administrator if this feature is available on your
phone). To avoid different countervalues for total extensions
and total trunk lines in the system, we recommend to reset
all the extensions and trunk line-counters at the same time.
Press to initiate a printout on the printer (see display)
This function is applicable when a printer is connected to the
system.
You also require a special class of service to initiate a printout. For a
detailed description of the printout, see section "Printout" on
page 57.
+15°
trunk
+15°
print reset
Call Metering
return
return
55