Using The Ring Binder And The High Capacity Stacker - Ricoh Pro C9200 Operator's Manual

Default: [Auto Detect]
You can specify a custom size between 139.7 and 330.2 mm (5.50 and 13.00 inches)
vertically, and between 139.7 and 487.7 mm (5.50 and 19.20 inches) horizontally.
For details about auto detectable paper sizes, see page 119 "Recommended Paper Sizes
and Types".
Perfect Binder Interposer Upper and Lower Tray (when the perfect binder interposer is
installed)
This section explains the paper tray settings for the upper and lower trays of the perfect binder
interposer.
Paper Size
Auto Detect, A3 , B4 JIS , 11 × 17 , 8K , 12 × 18 , 11 × 15 , 13 × 19
3
13 × 19 , 12
Custom Size
Default: [Auto Detect]
You can specify a custom size between 257.0 and 330.2 mm (10.12 and 13.00 inches)
vertically, and between 364.0 and 487.7 mm (14.34 and 19.20 inches) horizontally.
For details about auto detectable paper sizes, see page 119 "Recommended Paper Sizes
and Types".

Using the Ring Binder and the High Capacity Stacker

Using the ring binder
Removing bound booklets from the ring binder tray
• Keep your hands clear of the inside of the ring binder and the space under the ring binder
tray. You can trap your fingers if you do not.
• Be sure not to exit from Energy Saver mode or to switch the machine on when the ring binder
door is open and the binding unit is disconnected. Doing so will affect initialization, causing
the ring binder function to become unavailable (although other functions will be unaffected).
• If you inadvertently do this, connect the ring binder's binding unit again, close the door, and
then turn the power off and back on to restore normal operation.
1 3
/ × 19 / , 12 / × 18
5 5 5
1
/ , 13 × 18 , SRA3 , 310 × 432mm ,
2
Changing Tray Paper Settings
1
/ ,
5
147