6. Adjustment Settings for Operators
Menu Items and Functions
Machine: Image Position
For details about the following items, see page 168 "Machine: Image Position".
No.
Image Position: With Feed:
0101
Side 1
Image Position: With Feed:
0102
Side 2
Image Position: Across
0103
Feed: Side 1
Image Position: Across
0104
Feed: Side 2
0105
Perpendicularity
Adjustment
0106
Switch Paper Edge
Detection Sensor
Machine: Image Quality
For details about the following items, see page 173 "Machine: Image Quality".
No.
0201
Execute Image Quality
Adjustment
0202
Maximum Image Density
0203
Line Width
Machine: Paper Feed/ Output
For details about the following items, see page 175 "Machine: Paper Feed/ Output".
160
Item
Adjust the image position (left and right) on side 1 along
the feeding direction.
Adjust the image position (left and right) on side 2 along
the feeding direction.
Adjust the image position (up and down) on side 1
across the feeding direction.
Adjust the image position (up and down) on side 2
across the feeding direction.
Adjust the image skew (perpendicularity) across the
feeding direction.
Specify the level for detecting the paper edge for
correcting the image position along the feeding
direction.
Item
Execute image control or color registration adjustment
manually.
Adjust the toner adhesion amount to the intermediate
transfer belt during the image density adjustment.
Adjust the intensity of the laser for rasterizing the image
data.
Description
Description