Ricoh Pro C9200 Operator's Manual page 112

5. Paper Specifications and Adding Paper
• Do not place the end fence under the bottom plate. When the bottom plate descends, the
bottom plate may skew and break.
1. Check that paper in the paper tray is not being used, and then pull the tray carefully out
until it stops.
2. Remove paper if loaded.
3. Release the end fence.
4. While pressing the release button of the side fence, slide the side fence outward.
5. Load paper by aligning the paper with the left side of the paper tray.
Place paper with print side up.
110
DWP072
DWP074
DWP075