Ricoh Pro C9200 Operator's Manual page 41

First, print a template and measure the length of the specified area. Next, enter the length on the
machine to adjust the position of the image.
Specify the size of each piece of paper you use. Specified settings are saved as custom paper settings,
so that you can use the registered settings next time.
You need administrator privileges to adjust the image position.
Preparations
Before adjusting image positions, perform the following:
• Skew correction with the color controller
First of all, perform skew correction with the color controller. For details, see the manuals for the
color controller.
• Print a template
After performing skew correction, print a template included on the supplied CD-ROM. Select a
template whose size is the same with the paper that includes an image whose position you want to
adjust on the machine.
• Measure the template
When you print the template, arrows are printed in the corners.
Measure the length from the corners of the paper to the peaks of the arrows and from the peaks to
the peaks of the arrows, and then write the length in the box on the template. Perform these for both
sides of the paper.
1
2
1. The length from the peak of one arrow to the peak of another arrow
2. The length from the corner of the paper to the peak of the arrow
Entering the value
When you specify the lengths of the template after measuring them, the values to adjust the image
position are automatically calculated and applied.
DFZ010
Registering Custom Paper
39