Reset; Serial Number; Firmware Version; Update - Panduit PAT1M4.0 Operation Manual

© Panduit Corp. 2018
16B: RESET
The Reset button can be used to restart the PAT SYSTEM in the event of a Minor or Major Fault, or after a change
to Network Settings, or performing a Restore Factory Defaults or Firmware Update.
16C: SERIAL NUMBER
The Serial Number displays the Serial Number of this PAT SYSTEM device, which is also printed onto a label on
the side of the unit.
16D: FIRMWARE VERSION
The firmware version is displayed. To check for firmware updates, please visit www.panduit.com and click on the
below steps to link to the latest Firmware Update page:
dispenser before attempting to update the firmware.
1. Support
2. Download Center (Automatic Tools)
3. Download Firmware Upgrade (.bin)
Or navigate using hyperlink:
https://www.panduit.com/en/support/download-center/automatic-tools.html
The "image.bin" firmware file should be downloaded and placed on an accessible drive.
After the "image.bin" firmware file is located, and the UPDATE button is clicked, the PAT SYSTEM will import and
update its software using the new "image.bin" firmware. After performing the firmware update, the PDM4.0
dispenser will restart with new firmware version.
16E: UPDATE
Clicking on the OPEN button will prompt the user to locate the "image.bin" firmware file for uploading, as shown
below.
PA27647A01_05
OPERATION MANUAL
ENGLISH
PAT Web Browser Interface

RESET

CAUTION
A Reset may result in temporary loss
•
of Control.
A Reset may result in temporary loss
•
of communications.
PAT Web Browser Interface

UPDATE

CAUTION
A Reset will be formed at the
•
completion of a Firmware Update.
Download the latest version from
•
www.Panduit.com to local storage;
Then, use the Open button below to
•
locate the downloaded file.
Locate File
Page: 63 of 64
PAT1M4.0, PAT1M4.0-BT
PAT1.5M4.0, PAT1.5M4.0-BT,
PDM4.0, PHM
 CANCEL  RESET
NOTE: The tool MUST be connected to the
OPEN
 CANCEL  UPDATE
12-2018