3: General Power Tool Safety Warnings; Work Area Safety; Electrical Safety - Panduit PAT1M4.0 Operation Manual

© Panduit Corp. 2018
PL283N1 Filter/Regulator
A filter/regulator with a 40 micron maximum element rating must be
used to supply the PDM4.0 Dispenser with clean air and to ensure
proper air pressure
Filter/Regulator meets the requirements of the PDM4.0 Dispenser,
and it is recommended for best results. The PL283N1 includes a
1/4" male quick connect plug and provides 16 cfm at 85 PSIG (7,5
l/sec. at 5,8 bar). (Shown with PDH10-37 Air Supply Hose)
PDH10-37 Air Supply Hose
The Panduit PDH10-37 Air Supply hose is approximately 10 ft. (3 m)
long. The hose includes a 3/8 NPT male pipe thread fitting for
attaching the hose to the PL283N1 Filter/Regulator. A 1/4" female
quick disconnect fitting is included on the opposite end of the hose
for connection to the dispenser.

3: GENERAL POWER TOOL SAFETY WARNINGS

The PAT1M4.0 / PAT1.5M4.0 System is pneumatically and electrically operated and electronically controlled.
Therefore, certain safety practices must be followed.
3A: Work Area Safety
1 Keep work area clean and well lit. Cluttered or dark areas invite accidents.
2 DO NOT OPERATE POWER TOOLS IN EXPLOSIVE ATMOSPHERES, SUCH AS IN THE
PRESENCE OF FLAMMABLE LIQUIDS, GASES OR DUST. Power tools create sparks which
may ignite the dust or fumes. Provide adequate ventilation around the product.
3 KEEP CHILDREN AND BYSTANDERS AWAY WHILE OPERATING A POWER TOOL.
Distractions can cause you to lose control.
3B: Electrical Safety
1. Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power tools. Unmodified plugs and matching outlets
will reduce risk of electric shock.
2. Avoid body contact with earthed or grounded surfaces, such as pipes, radiators, ranges and
refrigerators. There is an increased risk of electric shock if your body is earthed or grounded.
3. DO NOT EXPOSE POWER TOOLS TO RAIN OR WET CONDITIONS. Water entering a power
tool will increase the risk of electric shock.
4. DO NOT abuse the cord. Never use the cord for carrying, pulling or unplugging the power
tool. Keep cord away from heat, oil, sharp edges or moving parts. Damaged or entangled
cords increase the risk of electric shock.
5. When operating a power tool outdoors, use an extension cord suitable for outdoor use. Use
of a cord suitable for outdoor use reduces the risk of electric shock.
PA27647A01_05
OPERATION MANUAL
ENGLISH
regulation. The Panduit
WARNING
• Read all safety warning and all instructions. Failure to follow the warnings and
instructions may result in electric shock, fire and/or serious injury.
• Save all warnings and instructions for future reference.
• The term "power tool" in the warnings refers to your main-operated (corded) power
tool or battery-operated (cordless) power tool.
Page: 8 of 64
PAT1M4.0, PAT1M4.0-BT
PAT1.5M4.0, PAT1.5M4.0-BT,
PDM4.0, PHM
PL283N1
Fig. 6
12-2018