Module Status; 15: Network; Username And Password - Panduit PAT1M4.0 Operation Manual

© Panduit Corp. 2018
14D: MODULE STATUS
NOTE:
The Module Status indicates the general state of the PAT SYSTEM. A table of Module Status states is below.
Minor Faults may be corrected by a Reset. Major faults may be corrected by using the Restore Factory Defaults.
If normal operation does not follow after a "Restore", see Page 64; please contact Panduit for technical support
or service.

15: NETWORK

15A: USERNAME AND PASSWORD
PA27647A01_05
OPERATION MANUAL
ENGLISH
Module
Network
Settings
No username and password authentication is required to view the Module
page.
Tool Status Description
Disconnected
Tool is not connected to the dispenser
Running
Tool is operating correctly
Idle
Waiting
Error
Tool has a fault
Dispenser Status Description
Running
Dispenser is operating correctly
Error
Dispenser has a fault
Page: 60 of 64
PAT Web Browser Interface
Dispenser Status Loaded
Tool Status Idle
PAT1M4.0, PAT1M4.0-BT
PAT1.5M4.0, PAT1.5M4.0-BT,
PDM4.0, PHM
12-2018