Removal of Electrical Box
2. Removal of Electrical Box
Procedure
Step
1
Disconnect the 2
connectors for the
reactor.
Cut the clamps at 2
2
locations.
Disconnect the
3
connector for the
compressor [S30].
10
Warning Be sure to wait for 10 minutes or more after turning off all power
supplies before disassembling work.
Procedure
[S30]
Points
Preparation
Remove the panels and
disconnect the connector for
the fan motor according to
the "Removal of Outer
Panels / Fan Motor".
(R9338)
(R9339)
When reassembling, coil the
excessive lead wire and
hang the loop on the hook.
(R9340)
Removal Procedure
Si00-872