FireplaceXtrordinair ProBuilder 72 Linear MV Installation Manual page 59

4 Remove the switch from the dashboard by depressing the tabs on the top and the bottom of the switch
housing while pressing the back of the switch forward through the hole in the dashboard. Replace the switch
with the included switch blank (see pictures below).
5 On the back side of the panel you removed there be a bracket with two wing nuts. Remove the wing nuts and
set aside for reinstallation.
6 Align the two holes on the bottom of the receiver assembly with the studs and secure the assembly to the
bracket using the two wing nuts removed in the previous step.
© Travis Industries
Installation
(for qualified installers only)
1/2/19 - 1458
59
PB 72 MV/GSB2 Install