FireplaceXtrordinair ProBuilder 72 Linear MV Installation Manual page 54

54
3. Remove both burners. Each is held in place with 6 screws (1/4" nutdriver).
4. Use a ¼" nut driver to remove (4) screws (2/per side) securing the air shutter retainers (left and right) to the
fireplace. Remove retainers to gain access to the burner orifices (set the retainers and screws aside for
reinstallation).
© Travis Industries
Installation
(for qualified installers only)
Remove (4 screws)
Remove air shutter retainers
to gain access to the orifices
1/2/19 - 1453 PB 72 MV/GSB2 Install