Valves, Removal; Cylinder Head Removed; Valves, Installation - Volvo Penta D1-13 Workshop Manual

21-4 Valve Mechanism
3
P0008146
885 498
P0008013
72
1
2
885 023

Valves, Removal

Cylinder head removed

Tools:
885023 Valve spring compressor
885498 Adapter
1 Remove the busbar (1) and glow plugs (2).
Remove the valves (3) with the aid of
885023 Valve spring compressor and
885498 Adapter. Mark the valves.
Remove the valve seals.

Valves, Installation

Tools:
885023 Valve spring compressor
885498 Adapter
1 Install the valve (1) in the cylinder head as
marked. Install a new valve seal (2), spring (3)
and valve spring washer (4).
Compress the valve spring with the spring clamp
and install the collets (5).
2 Install the glowplugs and tighten to the specified
torque: refer to Tightening torques page 9. Install
the busbar.
47701798 05-2013 © AB VOLVO PENTA