Heat Exchanger/Exhaust Manifold, Change - Volvo Penta D1-13 Workshop Manual

26-1 Radiator, Heat Exchanger
P0008147
1
P0008148
116
Heat Exchanger/Exhaust Manifold,
Change
Current cut off by the main switches. Drained
cooling system and raw water. Removed
expansion tank and attachment fitting (D1-30,
D2-40).
1
1
2
3
2
4
Undo the hose union on the exhaust elbow.
Unscrew the distribution box (1) and move it to
one side.
Undo the hose connections (1).
Undo the screws (2) and carefully pry the heat
exchanger / exhaust manifold away.
Remove the gasket.
Clean the sealing surfaces of the cylinder head.
Transfer the exhaust elbow to the new heat
exchanger/exhaust manifold.
Install the new heat exchanger / exhaust manifold
and gasket. Start to tighten the screws from the
center and then outwards. Torque to 10 Nm (7.4
lbf.ft).
Install the distribution box on the exhaust mani-
fold.
Install the hose unions and junction to the exhaust
elbow. Fill up with coolant. Warm up the engine
and check the sealing and coolant level.
47701798 05-2013 © AB VOLVO PENTA