Volvo Penta D1-13 Workshop Manual page 106

23-6 Injection Pump, Regulator
3
2
P0008134
3
1
P0008135
104
1
2
3 Put a new shim of the same thickness in place on
the pump housing. Insert the new injection pump
into the housing and fasten the control rod with
the lock clip.
Attach the oil supply pipe (1) to one of the studs
(2). Tighten the injection pump to the specified
torque; refer to Tightening torques page 9.
Install the feed line (3).
4 Install the stop solenoid (1) with a new seal.
Install the fuel return pipe (2).
Install the delivery pipes (3) and tighten to the
specified torque; refer to Tightening tor-
ques page 9.
47701798 05-2013 © AB VOLVO PENTA