26-6 Sea Water System, Sea Water Pump
26-6 Sea Water System, Sea Water Pump
P0008149
1
P0008150
120
Seawater Pump, Impeller, Change
Closed sea cock
1
Unscrew all screws on the cover (1).
1
2
Remove the impeller (1) with the aid of pliers.
3
Clean the pump housing and sealing surfaces.
4
Lubricate the impeller and housing with glycerin.
Place the impeller and a new gasket in the hous-
ing.
Screw the cover down.
Open the sea cock and start the engine. Check
the sealing.
IMPORTANT!
Only glycerin may be used as an impeller lubricant.
47701798 05-2013 © AB VOLVO PENTA