Volvo Penta D1-13 Workshop Manual page 65

1
P0008079
P0008080
P0008084
47701798 05-2013 © AB VOLVO PENTA
4
3
2
5
1
2
6
1
Install a new seal on the rocker arm bridge (1).
Install a new rocker arm bridge. Make sure that
the push rods and rocker arms (2) are correctly
positioned.
Tighten the nuts (3) evenly and to the specific tor-
que; refer to the Tightening torques page 9.
Install the oil delivery pipe (1) on the cylinder head
with new seals.
Installing the injectors:
Apply sealant part no. 840879 to the two lowest
threads (1).
Put new copper seals on the bottom of the cylinder
head.
Install the injectors and tighten them evenly to the
specified torque, refer to Tightening tor-
ques page 9.
21-1 Cylinder Head
63