Volvo Penta D1-13 Workshop Manual page 54

21-0 Engine Complete, General
P0007982
27
P0007984
52
8 Remove the fuel supply pipes (18) between the
fuel pump and injector; use the nut underneath
the fuel return pipe as a counterhold to avoid
kinking the pipe. Remove the fuel supply pipes
and put them on a clean, dry surface.
9 Remove the fuel return pipe (19) and the injectors
(20).
10 Unscrew the stop solenoid (21). Remove the
injection pump (22). Remove the pump retaining
nuts and bolts. Turn the stop lever clockwise and
carefully lift the pump, to make the lock clip on the
regulator arm accessible. Remove the lock clip
(23) and free the governor arm (24).
IMPORTANT!
Be careful when disassembling the injection pump,
avoid damaging or bending its lever.
NOTICE! Retain the shim / gasket (25) located
beneath the injection pump flange. Use the same
thickness of shims when installing.
11 Remove the valve cover (26), current bar (27) and
the glowplugs (28).
28
47701798 05-2013 © AB VOLVO PENTA