Table of Contents
Advertisement
Input/Output Configuration
By default, the Input/Output Configuration page is displayed when the main window
is opened (see figure 21). Users can configure the active inputs and outputs.
Figure 21.
Input/Output Configuration
Input Configuration
The Input Configuration panel displays the source format and sampling frequency of
the inputs. The Source Format displays the type of audio signal coming in through the
respective input. The Sampling Frequency details the frequency of the signal. If no signal
is found, the Source Format displays Not Present and the Sampling Frequency
displays None.
The inputs cannot be manually selected. Inputs are automatically switched based on input
priority in the firmware. The currently selected input is highlighted with a red bar.
Output Configuration
The Output Configuration panel allows the user to enable or disable audio delay. Click
the Enable Audio Delay checkbox to enable audio delay. When enabled, the user can
customize the delay time from 1 millisecond to 100 milliseconds. Default is Audio Delay
disabled.
DAC 102 • Product Configuration Software
15
Advertisement
Table of Contents
