T102 Test Channel Output; Setup - Comm: Setting Up The T102'S Communication Ports; T102 Id Code; T102 Ethernet Host Name - Teledyne T102 Operation Manual

Teledyne API - T102/501 TRS, Addendum to T101 Operation Manual

6.2.2. T102 Test Channel Output

Table 6-3. Test Parameters Available for Analog Output A4

6.3. SETUP – COMM: Setting Up the T102's Communication Ports

6.3.1. T102 ID Code

6.3.2. T102 Ethernet Host Name

07267B DCN6485
The following table supersedes the Test Parameters Available for Analog Output A4
table in the Test Channel Output section in the T101 Manual - PN 07266
TEST CHANNEL
NONE
PMT READING
UV READING
SAMPLE PRESSURE
SAMPLE FLOW
RCELL TEMP
CHASSIS TEMP
IZS TEMP
PMT TEMP
CHASSIS TEMP
HVPS VOLTAGE
1
This refers to the voltage range of the parameter and
not the output signal of the test channel.
Once a TEST function is selected, the instrument begins to report a signal on the A36
output and adds TEST= to the list of test functions viewable on the display (just before
the TIME display).
The default ID code for all T102 analyzers is 102.
To edit the instrument's ID code, see Analyzer ID Section of the T101 Manual - PN
07266.
The default name for all TAPI Model T102 analyzers is T102.
To change the Ethernet Host Name see Changing the Analyzer's HOSTNAME section in
the T101 Manual - PN 07266.
TEST PARAMETER RANGE
Test channel is turned off
0-5000 mV
0-5000 mV
0-40 in-Hg-A
0-1000 cm³/min
0-70° C
0-70° C
0-70° C
0-50° C
0-70° C
0-5000 V
T102 OPERATING INSTRUCTIONS
1
39