Calibration Procedures; T102 Calibration; M501-Trs Calibration - Teledyne T102 Operation Manual

8. CALIBRATION PROCEDURES

8.1. T102 Calibration

It is recommended that the T102 be calibrated in TRS gas measurement mode using

8.2. M501-TRS Calibration

07267B DCN6485
Calibration of the T102 should be performed according to the procedures described in
the Calibration Procedures and EPA Protocol Calibration Chapters in the T101 Manual
- PN 07266.
H S as a span gas.
2
If you are using the T102 for US-EPA controlled monitoring of SO
Protocol Calibration Chapter in the T101 Manual (PN 07266) for information on the
EPA calibration protocol.
The M501-TRS converter does not require field calibration.
NOTE
, see the EPA
2
49