Table of Contents
Advertisement
1.
Open panel cover. Panel announces, Use numbered
keys to enter ID.
2.
Enter Access Code using the numbered keys. Panel
announces, Please select from Start Menu.
3.
Press Delete from the Start menu. Panel announces,
Select from main menu
4.
Press Option #. Panel announces, Option 1, press
again for next option or done to select.
5.
Press 37. Option 37, press again for next option or
done to delete.
6.
Press DONE. Panel announces, Option 37 deleted.
Option 41 - Voice Chime
The panel will verbally announce which chime sensor has
been tripped if the chime feature is on.
Add enables chime voice.
1.
Open panel cover. Panel announces, Use numbered
keys to enter ID.
2.
Enter Access Code using the numbered keys. Panel
announces, Please select from Start Menu.
3.
Press Add from the Start menu. Panel announces,
Select from main menu
4.
Press Option #. Panel announces, Option 1, press
again for next option or done to select.
5.
Press 41. Panel announces, Option 41, press again for
next option or done to select
6.
Press DONE. Panel announces, Option 41 is on.
Delete disables chime voice. The panel will not announce
which chime sensor has been tripped but will still chime 2
times for doors and 3 times for motion sensors when a
given sensor is tripped.
1.
Open panel cover. Panel announces, Use numbered
keys to enter ID.
2.
Enter Access Code using the numbered keys. Panel
announces, Please select from Start Menu.
3.
Press Delete from the Start menu. Panel announces,
Select from main menu
4.
Press Option #. Panel announces, Option 1, press
again for next option or done to select.
5.
Press 41. Panel announces, Option 41, press again for
next option or done to delete
6.
Press DONE. Panel announces, Option 41 deleted.
Option 42 - Speaker Level
When this option is turned on you can set the panel
speaker level from 1 (the lowest voice level) to 8 (the
highest voice level). When you turn this option off, the
speaker level is set to 8 (the highest voice level).
Add allows you to set the speaker level from 1-8.
1.
Open panel cover. Panel announces, Use numbered
keys to enter ID.
12
2.
Enter Access Code using the numbered keys. Panel
announces, Please select from Start Menu.
3.
Press Add from the Start menu. Panel announces,
Select from main menu
4.
Press Option #. Panel announces, Option 1, press
again for next option or done to select.
5.
Press 42. Panel announces, Option 42, press again for
next option or use numbered keys to enter option.
6.
Enter the voice level (1 - 8) with the numbered keys.
7.
Panel announces the speaker level that has been
selected
Delete sets the speaker level to 8 (the highest voice level).
1.
Open panel cover. Panel announces, Use numbered
keys to enter ID.
2.
Enter Access Code using the numbered keys. Panel
announces, Please select from Start Menu.
3.
Press Delete from the Start menu. Panel announces,
Select from main menu
4.
Press Option #. Panel announces, Option 1, press
again for next option or done to select.
5.
Press 42. Panel announces, Option 42, press again for
next option or done to delete.
6.
Press DONE. Panel announces, Option 42 deleted.
Option 43 - Pager Phone Number
Add enables the pager phone number and allows you to
program up to 26 digits, including pauses.
Add 3 or 4 pauses to the end of the phone number to
ensure the complete pager message will be received. Press
the Test button to program a pause into the phone number.
1.
Open panel cover. Panel announces, Use numbered
keys to enter ID.
2.
Enter Access Code using the numbered keys. Panel
announces, Please select from Start Menu.
3.
Press Add from the Start menu. Panel announces,
Select from main menu
4.
Press Option #. Panel announces, Option 1, press
again for next option or done to select.
5.
Press 43. Panel announces, Option 43, press again for
next option or use numbered keys to enter phone num-
ber, then press done.
6.
Enter a phone number with the numbered keys.
Press Test to enter a pause in the phone number, press
Add to enter a "*", and press Delete to enter a "#".
Panel announces each number selected.
Note
The phone number is automatically stored after you've
pressed 26 digits. You will not have to press DONE to
store the number. If the number is less than 26 digits,
then DONE must be pressed.
7.
Press DONE. Panel confirms entered phone number.
Delete disables the pager phone number. The phone num-
ber will not be called in an alarm situation.
Hide quick links:
Advertisement
Table of Contents
