Home Control; Emergency - Interlogix Simon 3 User Manual

HOME CONTROL

S p e c i a l
D o o r s M o t i o n T i m e S e n s o r
C h i m e
The Home Control buttons are used to monitor activity
within and around the home. They are not used for intru-
sion protection. If any of the Home Control buttons are
pressed and a sensor or module is not associated (pro-
grammed) with this feature the panel will announce, Func-
tion not available.
Chime Doors
Chime Doors is used to signal the panel (chime) when a
protected door is opened while the system is disarmed.
The panel will chime twice and announce (see Option 41)
the door that has been tripped. This is a nice feature to use
if you're busy in one part of your home and you want to
know when family members are going in and out of your
home.
Turn Chime Doors on:
1. System must be disarmed. Press Chime Doors button.
Panel will chime twice and announce, Chime on. Chime
Doors button will be lit.
Turn Chime Doors off:
1. Press Chime Doors button
Panel will chime twice and announce, Chime off. Chime
Doors button no longer lit
Chime Special Motion
This is used to detect movement within a specific area.
These Motion Sensors are not used for intrusion protec-
tion. The panel will chime three times and announce (see
Option 41) the sensor that has been tripped. Use the same
panel procedures as Chime Doors, except, with the
Chime Special Motion button.
If you have Motion Sensors located in areas such as in a
patio area or at the front door and you want to know when
someone is approaching these areas, you would use this
feature.
Time Activated Lights
Turn on designated lights (with Lamp Modules) at a spe-
cific time. You can program what time the lights go on and
off (see Programming - Light Control).
Turn Time Activated Lights on:
1. Press Time Lights button.
Panel will announce, time activated light on. Time Lights
button will be lit.
4
O n O f f
H O M E C O
L i g h t s
Turn Time Activated Lights off:
1. Press Time Lights button.
N T R O L
Panel will announce, time activated light off. Time Lights
button no longer lit.
Sensor Activated Lights
Turn on designated lights (with Lamp Modules) when a
sensor is tripped. You can program lockout times when
Sensor Activated Lights won't be active (see Program-
ming Options 36 and 37).
Turn Sensor Activated Lights On:
1. System must be disarmed. Press Sensor Lights but-
ton.
Panel will announce, sensor activated lights on. Sensor
Lights button will be lit.
Turn Sensor Activated Lights Off:
1. Press Sensor Lights button.
Panel will announce, sensor activated lights off. Sensor
Lights button no longer lit.
Lights On
Turns on lights that are controlled by Lamp Modules.
1. Press Lights On button twice.
Panel announce, Lights on. Lights On button will NOT be
lit.
Lights Off
Turns off lights that are controlled by Lamp Modules.
1. Press Lights Off button twice.
Panel announces, Lights off. Lights Off button will NOT
be lit
Silent Exit
This feature silences the status beeps that accompany the
exit delay (see Status Beeps). Press Chime Doors after
you arm the system to silence status beeps. The panel will
still beep at the beginning and end of the exit delay.

EMERGENCY

. I R E P O L I C E
E M E R G E N C Y
A U X