Siemens SIMATIC NET PROFIBUS Owner's Manual page 344

Infrared Link Modul (ILM)
Note
We would point out that the contents of this product documentation shall not become a part of or modify any
prior or existing agreement, commitment or legal relationship. The Purchase Agreement contains the complete
and exclusive obligations of Siemens. Any statements contained in this documentation do not create new
warranties or restrict the existing warranty.
We would further point out that, for reasons of clarity, these operating instructions cannot deal with every
possible problem arising from the use of this device. Should you require further information or if any special
problems arise which are not sufficiently dealt with in the operating instructions, please contact your local
Siemens representative.
General
This device is electrically operated. Adhere strictly to the safety requirements relating to voltages applied to the
device as described in the operating instructions!
WARNING!
Failure to heed warnings may result in serious physical injury and/or material damage. Only appropriately
qualified personnel may operate this equipment or work in its vicinity. Personnel must be thoroughly familiar
with all warnings and maintenance measures in accordance with these operating instructions. Correct and safe
operation of this equipment requires proper transport, storage and assembly as well as careful operator control
and maintenance.
Personnel qualification requirements
Qualified personnel as referred to in the operating instructions or warning notes are defined as persons who
are familiar with the installation, startup and operation of this product and who possess the relevant
qualifications for their work, e.g. B.:
â
Training in or authorization for connecting up, grounding or labeling circuits and devices or systems in
accordance with current standards in safety technology;
â
Training in or authorization for the maintenance and use of suitable safety equipment in accordance with
current standards in safety technology;
â
First Aid qualification.
Copyright by Siemens
2
6ZB530–3AC30–0BA1