Appendix; Ce Designation - Siemens SIMATIC NET PROFIBUS Owner's Manual

8 Appendix

8 Appendix

8.1 CE Designation

Product Designation
EMC Directive
Application
Observe assembly
guidelines
Declaration of
Conformity
Machine Directive
Version 1.0 8/00
SIMATIC NET
OLM/P11 6GK1502-2CA00
OLM/P12 6GK1502-3CA00
OLM/G11 6GK1502-2CB00
OLM/G12 6GK1502-3CB00
OLM/G11-1300 6GK1502-2CC00
OLM/G12-1300 6GK1502-3CC00
OLM/G12-EEC 6GK1502-3CD00
The SIMATIC NET products named above fulfill the requirements of the following
EC directives:
Directive 89/336/EEC
"Electromagnetic Compatibility"
The product is designed for use in the following areas:
Area of
application
Domestic, business and
commercial use, as well
as in small factories
Industrial plants
The product complies with the specifications if the assembly guidelines and safety
instructions are observed during installation and operation as described in this
"Description and Operating Instructions SIMATIC NET Optical Link Modules" and
the following documentation:
SIMATIC NET PROFIBUS Networks Manual
In accordance with the above-named EC directive, the EC Declaration of Conformity
can be viewed by the authorities responsible at:
Siemens AG
Bereich Automatisierungs- und Antriebstechnik
Geschäftszweig Industrielle Kommunikation SIMATIC NET
Postfach 4848
D-90327 Nürnberg
Furthermore, the product is a component in accordance with Article 4(2) of the
EC Machine Directive 89/392/EWG.
In accordance with the Machine Directive, we are obliged to draw attention to the fact that
the designated product is solely designed for installation in a machine. Before the end product
is put into operation, it must be ensured that it conforms with the directive 89/392/EEC.
Requirement for
Interference emissions
EN 50081-1: 1992
EN 50081-2: 1993
8.1 CE Designation
Interference immunity
EN 50082-1: 1997
EN 50082-2: 1995
33