Siemens ISI EN 50295 Brochure page 126

AS-Interface Slaves
SIGNUM pushbuttons and indicator lights
AS-Interface customized enclosures
and front panel modules
Order form for AS-Interface housing
Order form
Date
1. Size of housing
two command points
three command points
four command points
six command points
2. EMERGENCY STOP actuator (only possible at point "A")
without EMERGENCY STOP
with non-interrogated EMERGENCY STOP (only possible with 3, 4 and 6 points)
with interrogated EMERGENCY STOP (only possible with 3, 4 and 6 points)
with safe AS-Interface adaptor
3. Yellow area for EMERGENCY STOP (only fill out if available)
without yellow stripes
with yellow stripes, without inscription at point "A"
with yellow stripes, with inscription at point "A" (state inscription under point 4)
4. Inscription and configuration
6
5. Installation orientation
vertical (identific. plates on the left)
horizontal (identification plates on top)
6. Terminal on top resp. on the right
no cable gland (drill-hole is not pressed out)
terminal for by-passed AS-Interface cable
metric cable gland for inserted AS-Interface cable
metric cable gland for inserted round cable
M12 socket for free input or output
AS-Interface F adaptor (only for housings with EMERGENCY STOP)
7. Terminal on top resp. on the left
no cable gland (drill-hole is not pressed out)
terminal for by-passed AS-Interface cable
metric cable gland for inserted AS-Interface cable
metric cable gland for inserted round cable
M12 socket for free input or out
8. Lamps
incandescent lamp 24V (if no option is marked, an incandescent lamp 24 V will be used)
incandescent lamp 30V
super bright LED (LED color is same as the color of the actuating element/signalling device)
6/126 Siemens IK PI · 2004
Inscription of the inscription plates
(max. 11 letters, 1 to 3 lines)
Siemens AG, A&D CD GKA LZA
to
Amberg, fax: +49 96 21 80-31 02
Order ID of purchaser/order ID I
Standard: 1 normally-open
Actuators
(abbreviations) contact (1 NO),
if not otherwise indicated
Left position
1 NO
F
1 NC
1 NO
E
1 NC
1 NO
D
1 NC
1 NO
C
1 NC
1 NO
B
1 NC
1 NO
A
1 NC
A to F are identification letters on the inside
of the covers and bases
Order ID of supplier
Right position
1 NO
1 NC
1 NO
1 NC
1 NO
1 NC
1 NO
1 NC
1 NO
1 NC
1 NO
1 NC