Siemens ISI EN 50295 Brochure page 136

AS-Interface Power Supply Units
Power supply units IP20
■
Technical specifications
Rated input voltage in V
Input
• Range selection
• Voltage range in V
• Overvoltage strength
• Mains buffering at
• Mains frequency rated value I
range in Hz
• Built-in input fuse in A
• Recommended m.c.b (IEC898)
in mains supply circuit in A
Output
• Stabilized floating DC voltage acc.
to AS-Interface specification
• Voltage rating U
aRated
• Total tolerance in V
• Residual ripple in mVpp
(0–10 kHz, AS-i+/AS-i–)
• Spikes in mVpp
(10–500 kHz, AS-i+/AS-i–)
6
• Operational display
• Current rating
a Rated
Efficiency/power loss
• Efficiency at U
aRated
• Power loss at U
aRated
Protective and monitoring functions
• Output overvoltage protection
• Current limitation in A
• Short-circuit protection
Safety
• Primary/secondary isolation
• Safety class (EN 60 950/IEC 950)
• Degree of protection
• Approvals
EMC
• Emitted interference
• Noise immunity
Operational data
• Ambient temperature range in °C
• Transport and storage
temperature range in °C
• Humidity class
Mechanical data
• Input connection
• Output connection AS-i +
• Output connection AS-i -
• Output connection shield S
• Output connection Ground
• Dimensions (W x H x D) in mm
• Mounting
6/136 Siemens IK PI · 2004
AS-Interface power supply unit
Single output IP20
Output current 2.4 A
3RX9 307-0AA00
115/230 AC
Single-phase AC
With changeover switch
195 to 253 / 102 to 132 AC
EN 61 000-4-1
Rated in ms > 20
e
50/60/47 to 63
T 2
From 10, characteristic C
Yes
in V 30 DC
29.5 to 31.6 DC
< 300
< 50
Green LED
in A 2.4 (power boost: 2.8)
, in % Approx. 85
aRated
, in W Approx. 10
aRated
No
> 2.8
Yes
SELV to EN 60 950
I
IP20
CE, UL, marine
EN 50 081-1
EN 50 082-2
-25 to +55
-25 to +60
Max. 80% rel. humidity
Spring-loaded terminal connection (0.8 to 2.5 mm
Spring-loaded terminal connection (0.8 to 2.5 mm
Spring-loaded terminal connection (0.8 to 2.5 mm
Spring-loaded terminal connection (0.8 to 2.5 mm
-
´ ´
46 135 105
Snap-on mounting onto standard rail
DIN EN 50 022-35 x 7.5 mm
Output current 4 A
3RX9 307-1AA00
115/230 AC
Single-phase AC
T 5 (not accessible)
From 10, characteristic C
4 (power boost: 4.5)
Approx. 18
SELV to EN 60 950 (in preparation)
CE, UL, CSA (in preparation)
2
)
2
)
2
)
2
)
-
´ ´
75 135 107
Output current 3.3 A
4FD5 213-0AA10-1A
230/400 AC
Single- and two-phase AC
With plug
197 to 430 AC
> 20 at 230 V; > 60 at 400 V
T 3 (not accessible)
From 16, characteristic C
Yes, can be connected in parallel
DC 3.3 (power boost: DC 4)
Approx. 15
> 5
SELV to EN 60 950
CE, UL (in preparation)
-45 to +55
-45 to +80
Spring-loaded terminal connection
2
(0.8 to 2.5 mm )
´ ´
75 135 103
Mounting onto standard rail