Siemens ISI EN 50295 Brochure page 118

AS-Interface Slaves
AS-Interface motor starters and IP20 load feeders
AS-Interface load feeder modules IP20
■
Technical specifications
I/O configuration (hex)
ID code (hex)
Supply voltage for electronics
and inputs in V
(checkbacks from the auxiliary
contacts of the controlgear)
via AS-Interface data cable
Power consumption of AS-Interface
in mA
Temperature range
• Operating temperature T
• Storage temperature in °C
Degree of protection
Inputs
Polarity reversal protection
Max. input current in mA
Max. permissible cable length
between IN + and an input in m
Outputs
External supply voltage for outputs
6
in V
(triggering of the contactor coils)
via auxiliary power
Current carrying capacity I
Summation current (thermal) I
Polarity reversal protection
Short-circuit protection
Inductive interference protection
(free-wheeling diode)
Watchdog
(shutdown of outputs in case
of AS-Interface fault)
Diagnostics
Via LED at the housing
Conductor cross-sections
Plug connector for AS-Interface and
auxiliary power in mm
Cage Clamp for I/O wiring in mm
Power connector, 5-pole in mm
PE/N conductor wiring on carrier
2
in mm
Addressing
The technical specifications for the load feeders is the same as that specified for the individual devices.
The high short-circuit strength of I
6/118 Siemens IK PI · 2004
Load feeders modules IP20
2I/1O
3RK1 400-1KG01-0AA1
3
F
26.5 to 31.6 (in accordance with AS-Interface specification)
8 to 12
in °C 0 to +55
u
-40 to +85
IP20
Built-in
6
0.4
24 DC
in A 0.5 (DC-13/DC-14)
e
in A 2
th
Built-in
Built-in
Built-in
Built-in
Auxiliary voltage applied
AS-Interface communication OK
AS-Interface communication faulty
Station address = 0 (module not addressed)
0.5 to 0.75 (flexible)
2
2
0.8 to 2.5 (flexible, without end sleeve)
2
0.5 to 2.5
AWG 28 to 12
2.5 flexible
AWG 13
After the 15th addressing, the module keeps the last address
= 50 kA also applies.
q
4I/2O 2I/1OR
3RK1 400-1MG01-0AA1 3RK1 402-3KG02-0AA1
7 3
F F
Max. 230 AC
3 (AC-15); 0.1 (DC-13 at 220 V)
3
Not required
No
Not required
Output activated
AS-Interface communication OK
AS-Interface communication faulty
Station address = 0 (module not addressed)
3I/2OR
3RK1 402-3LG02-0AA1
7
F