Siemens ISI EN 50295 Brochure page 91

■
Technical specifications (continued)
Slave type
Operational voltage in accordance
with AS-Interface specification in V
Total current input in mA
Input connection
Inputs
• Sensor supply via AS-Interface
• Voltage range in V
• Connection of sensors
• Signal 1 U
in
Group signal
• Current carrying capacity Iout
• Output voltage U
out
Watchdog
I/O configuration
ID/ID2 code
Assignment of data bits
• Data bit D0
• Data bit D1
• Data bit D2
• Data bit D3
AS-Interface certificate
Approvals
Degree of protection
Ambient temperature in °C
Storage temperature in °C
Displays
• Inputs/outputs
Connection
Addressing
Note 1
Note 2
Note 3
I/O modules for operation in IP20 control cabinet
16 inputs
Screw-type terminals
Transistor PNP
3RG9 002-0DE00
Standard slaves
26.5 to 31.6
70
PNP
Short-circuit and overload proof
20 to 30
Mechanical contacts
³
20 to 30 V 3 mA
25 mA
20 to 30 V
Built-in
7
F/F
Group signal G1 (D0)
Inputs I 1.1 to I 1.4 (D0 to D3)
Group signal G2 (D1)
Inputs I 2.1 to I 2.4 (D0 to D3)
Group signal G3 (D2)
Inputs I 3.1 to I 3.4 (D0 to D3)
Group signal G4 (D3)
Inputs I 4.1 to I 4.4 (D0 to D3)
Yes
UL, CSA, ship building
IP20
-25 to +70
-40 to +85
Yellow LED
Via screw terminal
An integrated addressing socket can be used
The module has four input groups. Each input group has four inputs and one group signal for power supply
of the inputs. The input groups are activated separately, whereby the relevant group signal is set by the control.
Then the switching states of the associated inputs are read in.
Function block required
To supply the output circuit, an external supplementary supply (AUX POWER) of 20 to 30 V DC is necessary.
The supplementary supply must comply with VDE 0106 (PELV), safety class III.
AS-Interface Slaves
Combicon connection
3RG9 004-0DE00
Via Combicon pin connector
Siemens IK PI · 2004
Module F90
6
6/91