Siemens ISI EN 50295 Brochure page 109

■
Technical specifications
Degree of protection
Material
Color
Cover flap
Dimensions (W x H x D) in mm
Temperature range
• Operating temperature in °C
• Storage temperature in °C
Permissible service position
Shock resistance
Rectangular pulse (g/ms)
Sine pulse (g/ms)
External voltage supply
For output supply (contactor activation)
Rated operational voltage U in V
e
For electronics and inputs (acknowledgements
of switchgear status) via AS-Interface data
cable in V
I/O configuration (hex)
ID code (hex)
Power consumption of AS-Interface in mA
Current input U in mA
Aux
Watchdog
(shutdown of outputs in case of AS-Interface
fault)
Diagnostics
Via AS-Interface
Via LED at the housing
Via LED at the hand-held terminal
Main circuit
Rated operational voltage
Safety separation between main and auxiliary
circuit (to DIN VDE 0106, Part 101)
Rated output
Permissible operating duties
Permissible operating frequency for a starting
time t = 0.1 s and a rel. ON period t
A
Trip class
Conductor cross-section for power connector
incoming supply/ feeder/ looping through 9-
pole
Max. perm. current via power connector
(dependent on cable cross-section)
• T = 60 °C
u
• T = 40 °C
u
Short-circuit strength of starter combination
in kA
Electrical endurance of the circuit-breaker
component for a load I (AC-3)
a
AS-Interface motor starters and IP65/67 load feeders
DS/RS
IP65 (with covered connecting elements and cover flap)
Thermoplastic (glass-fibre reinforced)
Anthracite RAL 7016
Latching, sealable
´ ´
120 265 134
-25 to +55 (derating must be observed: See manual)
-40 to +70
2/unlimited, 10/5 or 5/10
2/unlimited, 8/10 or 15/5
DC 24 (PELV; must be earthed)
DC 26.5 to 31.6 (in compliance with AS-Interface specification)
7
D
Max. 100
Approx. 100
Built-in
Checkback signal from circuit-breaker and contactor(s)
via positively-driven auxiliary contacts and separate inputs
Auxiliary voltage applied
AS-Interface communication OK
AS-Interface communication faulty
Station address = 0 (module not addressed)
ON or clockwise rotation or anti-clockwise rotation
500 V AC to DIN VDE 0106 Part 101, AC 600 V to CSA and UL
up to 400 V
5.5 kW
Uninterrupted duty, temporary duty, periodic duty, intermittent periodic duty
(50 % rel. ON-time at 80 operations/h at 5.5 kW)
80 1/h
= 50 %
EP
Class 10
2
4 mm , AWG 15-11
2)
30 A (4 mm , AWG (11); 20 A (2.5 mm
2)
35 A (4 mm , AWG (11); 25 A (2.5 mm
50 (to type of co-ordination "1")
See service-life characteristics for 3RT10 contac-
tors
AS-Interface Slaves
AS-Interface compact starters IP65 (400 V AC)
EDS/ERS
Please note:
According to DIN 43 602
start-up command "I"
to the right or top
E
-
2.2 kW
600 1/h
2)
), AWG (15); 12 A (1.5 mm
2
), AWG (15); 15 A (1.5 mm
100
³
10 million operating cycles
2
), AWG (13)
2
), AWG (13)
Siemens IK PI · 2004 6/109
6