Important Parameter Settings - Theben MIX 2 Series Manual

MIX 2 series RMG 4 U / RME 4 U actuators

6.2.4 Important parameter settings

Standard or customer-defined parameter settings apply for unlisted parameters.
Table 25: RMG 4 U
Parameter page
General
RMG 4 U channel C1:
Configuration options
Contact characteristics
Hour counter and service
Table 26: VARIA
Parameter page
Selection of display pages
Display objects page 1
Page 1, line 1
Page 1, line 2
*Suggested text
Updated: Apr-15 (Subject to changes)
Parameter
Type of basic module
Channel function
Activate hour counter
Type of contact
Type of hour counter
Service interval
(0..2000, x10 h)
Reporting of time to service
when changing
(0..100 h, 0 = no report)
Report service cyclically
Parameter
Show page 1 for display objects
Fade in operating instructions
on page 1
Page heading
Line format
Text for line 1
Unit for display object
Value range
Display before receipt of value
Line format
Text for line 1
Text for object value = 0
Text for object value = 1
Display before receipt of value
Setting
RMG 4 U
Switching ON/OFF
Yes..
NO contact
Counter for time period before
next service
200
100
yes
Setting
yes
No
Lamp maintenance*
16 bit counter value object type
Service in*
h
Negative and positive numbers
Read from object via bus
Switch on object type
Lamp status*
OK*
Service*
Read from object via bus
Page 44 of 50