The "Flashing - Theben MIX 2 Series Manual

MIX 2 series RMG 4 U / RME 4 U actuators
5.3.2.8 The "Flashing.." parameter page
This parameter page appears if Flashing is chosen as the Channel function.
Table 13
Designation
ON phase of flash pulse
hours (0..3)
minutes (0..60)
seconds (0.255)
OFF phase of flash pulse
hours (0..3)
minutes (0..60)
seconds (0.255)
How often should it flash
Updated: Apr-15 (Subject to changes)
Values
0..3 Input of desired pulse time (t
0..60 Input of desired pulse time in minutes.
0..255 Input of desired pulse time in seconds.
0..3 Input of desired length of break (t
hours.
0..60 Input of desired length of break in
minutes.
0..255 Input of desired length of break in
seconds.
Until it switches off The channel flashes until a switch-off
telegram is received.
1 x The channel flashes as often as set here.
2 x
3 x
4 x
5 x
7 x
10 x
15 x
20 x
30 x
50 x
Description
) in hours.
i
) in
p
Page 29 of 50