The "Contact Characteristics" Parameter Page - Theben MIX 2 Series Manual

MIX 2 series RMG 4 U / RME 4 U actuators

5.3.2.4 The "Contact characteristics" parameter page

Table 9
Designation
Type of contact
Status with download
and bus failure
Status after restoration
of the mains supply or
bus supply
Updated: Apr-15 (Subject to changes)
Values
NO contact Standard:
NC contact Inverted:
OFF ..the relay remains switched off.
ON ..the relay switches on.
unchanged ...the relay remains in the same state as
OFF ..the relay remains switched off.
ON ..the relay switches on.
Same as before failure ...the relay remains in the same state as
Description
The relay contact is closed when a
switch-on command is issued.
The relay contact is opened when a
switch-on command is issued.
After download or with loss of bus
voltage...
before.
After return of mains or bus voltage...
before.
Page 26 of 50