The "Block Function" Parameter Page - Theben MIX 2 Series Manual

MIX 2 series RMG 4 U / RME 4 U actuators
5.3.2.10

The "Block function" parameter page

This page appears when Adjust block function is selected on the Configuration options parameter
page.
Table 15
Designation
Block telegram
Response when setting
the block
Response when
cancelling the block
Updated: Apr-15 (Subject to changes)
Values
Block with ON telegram 0 = Enable
Block with OFF telegram 0 = Block
OFF Switch off
ON Switch on
unchanged No response
OFF Switch off
ON Switch on
Unchanged No response
update Restore normal operation and switch
Description
1 = Block
1 = Enable
Note: The block is always deactivated
after reset.
relay accordingly.
Page 32 of 50