The "Link" Parameter Page - Theben MIX 2 Series Manual

MIX 2 series RMG 4 U / RME 4 U actuators
5.3.2.14

The "Link" parameter page

This page appears when Activate link is selected on the Configuration options parameter page.
An additional object appears, which forms a logical link in combination with the channel's
switching/threshold object.
The channel only switches if the link requirement has been met.
Table 19
Designation
Activate link
Disable object affects
logic object
Updated: Apr-15 (Subject to changes)
Values
Selection of logical link with the
channel object
AND link The Logic input in AND gate object
appears (e.g. object 1).
OR link (override) The Logic input in OR gate object
appears (e.g. object 1).
XOR link The Logic input in XOR gate object
appears (e.g. object 1).
No The disable object only affects the
channel object (e.g. object 0).
If required, the logic object can activate
the channel function despite block (with
OR and XOR link).
yes The disable object affects the channel
object and the logic object.
The channel function is completely
blocked if the block is active.
Description
Page 39 of 50