The "Scenes" Parameter Page - Theben MIX 2 Series Manual

MIX 2 series RMG 4 U / RME 4 U actuators
5.3.2.11

The "Scenes" parameter page

This page appears when the Scenes are activated on the Configuration options parameter page.
Each channel can participate in up to 8 scenes.
Table 16
Designation
Block telegram for
scenes
All channel scene
statuses
Participation in central
scene object
Channel reacts to
Status after download
Permit teach in
Updated: Apr-15 (Subject to changes)
Values
Block with ON telegram 0 = Enable
Block with OFF telegram 0 = Block
Overwrite on download A download deletes all scene memories
Unchanged after download All previously taught in scenes are
No scene number
Scene number 1
Scene number 63
Description
1 = Block
1 = Enable
Note: With this setting the scenes are
always blocked immediately after reset
or download.
in a channel, i.e. all previously taught in
scenes.
When a scene number is called, the
channel assumes the configured Status
after download (see below).
See appendix: Teach in scenes without
telegrams
saved.
However, the scene numbers the channel
should react to can be changed (see
below: Channel reacts to).
Should the device react to the central
No
yes scene object?
First of the 8 possible scene numbers the
channel is to react to.
Off New switching status that the selected
On scene number is to be allocated to.
Only possible if the scene statuses are to
be overwritten after download.
No Scenes can only be called up.
Yes The user can both call up and teach in or
amend scenes.
Page 33 of 50