5.2
Settings
5.2.1
Network settings
You can change the network settings for the TC 649 E in this menu.
Please note that all changes only affect the right network interface
(Ethernet).
5.2.1.1 DHCP static
To change the network interface from DHCP to static ...
Untick the Use DHCP field.
Enter a valid IPv4 address, the corresponding subnet mask and a standard
gateway if applicable.
Click on Save to confirm changes.
To configure and use the NTP server, proceed as follows ...
Tick the box next to Use NTP server.
Enter the relevant NTP server address.
Click on Save to confirm changes.
TC 649 E Manual
Controls and menu
15