The "Hour Counter And Service" Parameter Page - Theben MIX 2 Series Manual

MIX 2 series RMG 4 U / RME 4 U actuators
5.3.2.13

The "Hour counter and service" parameter page

This page appears when Activate hour counter is selected on the Configuration options parameter
page.
Table 18
Designation
Type of hour counter
Reporting of operating
hours when changing
(0..100 h, 0 = no report)
Report operating hours
cyclically
Time for cyclical
transmission
Service interval
(0..2000, x10 h)
Reporting of time to
service when changing
(0..100 h, 0 = no report)
Report time to service
cyclically
Report service cyclically
Updated: Apr-15 (Subject to changes)
Values
Hour counter Forward counter for duty cycle of the
Counter for time period before
next service
Hour counter
Default value = 10
2 minutes, 3 minutes,
5 minutes, 10 minutes,
15 minutes, 20 minutes,
30 minutes, 45 minutes
60 minutes
Counter for time period before next service
Default value = 100
Default value = 10
channel.
Backward counter for duty cycle of the
channel.
0..100 At what interval is the current meter
reading to be sent?
Example:
10 = Send each time the meter reading
increases by another 10 hours.
No Send at regular intervals?
yes
At what interval?
0..2000 Desired timescale between 2 services.
Example:
10 = 10 x 10 h
= 100 hours
0..100 At what interval is the current meter
reading to be sent?
Example:
10 = Send each time the meter reading
decreases by another 10 hours.
no Send remaining time to next service at
Yes regular intervals?
 Object Time to next service.
no Send expiry of time to next service at
Yes regular intervals?
 Object Service required.
Description
Page 37 of 50