The "Rmg 4 U Channel Cx: Configuration Options" Parameter Page - Theben MIX 2 Series Manual

MIX 2 series RMG 4 U / RME 4 U actuators

5.3.2.3 The "RMG 4 U channel Cx: Configuration options" parameter page

Table 8
Designation
Copy main parameters
from channel C1
Channel function
Activation of function via
Adjust block function
Activate scenes
Updated: Apr-15 (Subject to changes)
Values
Switching On/Off..
On/off time delay..
Pulse function..
Staircase light timer switch with
forewarning function..
Flashing..
Switch object The channel is operated via a 1-bit
Exceeding the threshold The channel is operated through
Description
For channels C2..C4 only.
The copy function simplifies the
configuration of identical channels by
many settings only having to be entered
on the 1st channel.
Yes The following parameter settings are
taken directly from channel C1:
- Channel function
- Adjust block function
- Participation in central objects
- Adjust feedback
no No settings are taken from C1.
Determines the basic functionality of the
channel.
object.
exceeding a 1 or 2-byte threshold.
See below: The „Threshold" parameter
page
Yes.. The block function can be individually
adjusted.
The relevant parameter page is shown.
no The block function works with the
standard parameters:
- Block with ON telegram
- When setting the block: Unchanged
- When cancelling: Update.
Yes.. Should scenes be used?
no
Page 24 of 50