Theben KNX Series Handbook page 79

5.2.5 Important parameter settings
Standard or customer-defined parameter settings apply to unlisted parameters.
RAMSES 718 P:
Parameter page
RTC setting
Operating Mode
Channel I1
Switch object 1
TR 648 top2 RC:
Parameter page
General
Switching channel C1
HM 6 T:
Parameter page
Channel H1: Configuration
options
RAMSES 718 P / RAMSES 718 S
Parameter
Control
Rotary control function
Button function
Objects for determining the operating
mode
Activate channel
Channel function
Number of telegrams
Object type
Send if input = 1
Telegram
Send if input = 0
Telegram
Send cyclically
Response after restoration of the bus
supply
Parameter
Activate time switch
channel C1
Telegram type C1.1
As with clock -> ON
Telegram
With clock -> OFF
Telegram
Parameter
Channel function
Type of actuating value
Typical applications
Setting
Heating control only
Manual offset
Presence button
New: Operating mode, presence,
window status
ON
Switch
One telegram
Switching (1 bit)
yes
ON
yes
OFF
yes
update (immediately)
Setting
yes
HVAC operating mode
send following telegram once
Standby
send following telegram once
Temperature reduction at night
Setting
Heating actuator
continuous..
79