Theben KNX Series Handbook page 57

Designation
Send cyclically
Response after
restoration of the bus
supply
Response when setting
the block
Response when
cancelling the block

If a channel is blocked, no telegrams will be sent cyclically.
RAMSES 718 P / RAMSES 718 S
Values
no
yes, always
only if input = 1
only if input = 0
none
update (immediately)
update (after 5 s)
update (after 10 s)
update (after 15 s)
Ignore block
no response
as with input = 1
as with input = 0
no response
update
The application programmes RAMSES 718 P/S
Description
When should be sent cyclically?
The cycle time is set on the main
parameter page of the channel.
Do not send.
Send update telegram
immediately or with delay.
The block function is ineffective
with this telegram.
Do not respond when setting the
block.
Respond as with rising edge.
Respond as with falling edge.
Do not respond when the block is
cancelled.
Send update telegram.
57