Function Description - Theben KNX Series Handbook

1 Function description

• Individual room thermostat
• For controlling heating actuators or motorised actuators
• Can be used as a continuous or two point control (can also be combined).
• Constant PI control that can be configured for 2-stage heating (basic and additional
stage, e.g. underfloor heating and radiators) or for heating and cooling (radiators and
cooling ceiling)
• Two front panels are included in the scope of supply: an absolute and a relative scale
• Rotary control can be limited by parameter
• Buttons for presence or operating types: comfort, standby, temperature reduction at
night, frost protection
• 4 binary inputs for conventional switches/buttons (switching, dimming, blinds), also for
external temperature sensors, window contact or presence signal
• Temperature sensor can also be connected to limit the floor temperature
• LEDs for heating/cooling and operating types
Only RAMSES 718 P
1
Only RAMSES 718 P
2
Only RAMSES 718 P
3
RAMSES 718 P / RAMSES 718 S
.
2
3
Function description
1
3