Table of Contents
Advertisement
The application programmes RAMSES 718 P/S
4.3.6 Objects for the external inputs: Blinds function
Object 30: Channel I1 UP/DOWN, UP, DOWN
Sends operating command to the blind actuator.
Object 31: Channel I1 Step/Stop
Sends Step/Stop commands to the blind actuator.
Object 32: channel I1.1 – switching, priority, percentage value.., height % + slat %
Initial object for the additional function with double-click.
7 telegram formats can be set:
Switching ON/OFF, priority, send percentage value, send value, 2 byte DPT 9.x,
4 byte DPT 14.x, height % + slat %.
Object 34: Channel I1 block = 1, or block = 0
The channel is blocked via this object.
The acting direction of the block object and behaviour when setting or cancelling the block can
be configured.
Objects 35-49
Objects for channels I2-I4.
RAMSES 718 P / RAMSES 718 S
30
Advertisement
Table of Contents
