Sherwood RD-7502 Operating Instructions Manual page 49

Continued
Memorizing the adjusted channel levels
• You can memorize the adjusted channel levels into preset memory("REF 1", "REF 2") and recall the memorized whenever
you want.
1.
After performing the steps 1~3 in "Adjusting the current channel level" procedure on page 48, press the CURSOR
UP(▲)/DOWN(▼) buttons, then press the ENTER button.
8 9
7
MUTE
VOLUME
P .SCAN
0
D/A MODE CH.LEVEL
DISPLAY SETUP
SEL ENTER SEL
SOUND
EXT.IN
TONE PARAMETER
TAPE VIDEO 1 VIDEO 2 VIDEO 3
FM/AM/XM CD AUX
2.
Press the CURSOR LEFT(◀)/RIGHT(▶) buttons to select the desired preset memory, then press the ENTER button.
8 9
7
MUTE
VOLUME
P .SCAN
0
D/A MODE CH.LEVEL
DISPLAY SETUP
SEL ENTER SEL
SOUND
EXT.IN
TONE PARAMETER
TAPE VIDEO 1 VIDEO 2 VIDEO 3
FM/AM/XM CD AUX
Recalling the memorized channel levels
1.
Press the CURSOR UP(▲)/DOWN(▼) buttons to select the "MODE~".
8 9
7
MUTE
P .SCAN
0
D/A MODE CH.LEVEL
DISPLAY
SEL ENTER
SOUND
TONE PARAMETER
TAPE VIDEO 1 VIDEO 2
FM/AM/XM CD AUX
2.
Press the CURSOR LEFT(◀)/ RIGHT(▶) buttons to select the desired one of REF 1 and REF 2.
7
MUTE
P .SCAN
0
D/A MODE CH.LEVEL
DISPLAY
SEL ENTER
SOUND
TONE PARAMETER
TAPE VIDEO 1 VIDEO 2
FM/AM/XM CD AUX
ENTER
ENTER
VOLUME
SETUP
SEL
EXT.IN
VIDEO 3
VOLUME
SETUP
SEL
EXT.IN
VIDEO 3
• The "1" of "REF 1" indication flickers.
• Each time the CURSOR LEFT(◀)/RIGHT(▶) buttons are
pressed, "REF 1" or "REF 2" is selected.
• The adjusted channel levels have now been memorized
into the selected memory.
• "CAL" may be displayed instead of "REF 1" or "REF 2".
• Then the channel levels memorized into the selected
preset memory are recalled.
49