Listening To Radio Broadcasts - Sherwood RD-7502 Operating Instructions Manual

LISTENING TO RADIO BROADCASTS

Auto tuning
1.
Select the desired band.
FM/AM/XM
• Each time this button is pressed, the band changes as
follows:
→ FM ST → FM MONO → AM → XM
("ST" lights up) ("ST" goes off)
• When FM stereo broadcasts are poor because of weak
broadcast signals, select the FM mono mode to reduce
the noise, then FM broadcasts are reproduced in
monaural sound.
• To listen to XM Satellite Radio, select XM mode.
(For details, refer to "XM Satellite Radio (only for
North America)" on page 28.)
Manual tuning
• Manual tuning is useful when you already know the
frequency of the desired station.
• After selecting the desired band, press the TUNING UP(+)
/ DOWN(-) buttons or the SELECT UP(▶) / DOWN(◀)
buttons repeatedly until the right frequency has been
reached.
TUNE
DISPLAY SETUP
ENTER
SEL SEL
SOUND
TONE PARAMETER EXT.IN
TAPE VIDEO 1 VIDEO 2 VIDEO 3
FM/AM/XM CD AUX
REMOTE CONTROL RC-110
D/A MODE CH.LEVEL
DISPLAY SETUP
SEL ENTER SEL
SEL
SOUND
EXT.IN
TONE PARAMETER
TAPE VIDEO 1 VIDEO 2 VIDEO 3
FM/AM/XM CD AUX
REMOTE CONTROL RC-110
2.
Press the TUNING UP(+)/DOWN(-) buttons or the
SELECT UP(▶) / DOWN(◀) buttons for more than
0.5 second.
TUNE
• The tuner will now search until a station of sufficient
strength has been found. The display shows the tuned
frequency and "TUNED".
• If the station found is not the desired one, simply repeat
this operation.
• Weak stations are skipped during auto tuning.
Auto presetting
• Auto presetting function automatically searches for FM
stations only and store them in the memory.
• While listening to radio broadcasts, press and hold
down the (MEMORY/)ENTER button for more than 2
seconds.
MEMO/ENTER
SEL
• Then "AUTO MEM" flickers and this receiver starts auto
presetting.
• Up to 30 FM stations can be stored.
Notes:
• FM stations of weak strength cannot be memorized.
• To memorize AM stations or weak stations, preform
"Manual presetting" procedure with using "Manual
tuning" operation.
• In the XM mode, auto presetting doesn't work.
26
D/A MODE CH.LEVEL
DISPLAY SETUP
SEL ENTER SEL
SEL
SOUND
TONE PARAMETER EXT.IN
TAPE VIDEO 1 VIDEO 2 VIDEO 3
FM/AM/XM CD AUX
REMOTE CONTROL RC-110
8 9
7
MUTE
VOLUME
P .SCAN
0
D/A MODE CH.LEVEL
DISPLAY SETUP
ENTER
SEL SEL
ENTER
SOUND
TONE PARAMETER EXT.IN
TAPE VIDEO 1 VIDEO 2 VIDEO 3
FM/AM/XM CD AUX
SEL