Transport Instructions - Genie GS-2668 RT Operator's Manual

First Edition · Tenth Printing
Observe and Obey:
Common sense and planning must be applied to
control the movement of the machine when
lifting it with a crane.
Transport vehicle must be parked on a level
surface.
Transport vehicle must be secured to prevent
rolling while machine is being loaded.
Be sure vehicle capacity, loading surfaces and
chains or straps are sufficient to withstand
machine weight. See Specifications section.
Machine must be on level surface or secured
before releasing brakes.
Securing to Truck or Trailer for
Transit
Always chock machine wheels in preparation for
transport.
Use tie-down points on chassis for anchoring
down to transport surface.
Use chains or straps of ample load capacity.
Turn key switch to the
key before transporting.
Inspect entire machine for loose or unsecured
items.
Part No. 48735
position and remove
OFF
Genie GS-2668 RT & Genie GS-3268 RT

Transport Instructions

Brake Release Operation
1 Chock wheels to prevent machine from rolling.
2 Be sure winch line is properly secured to drive
chassis tie points and path is clear of all
obstructions.
3 Turn the brake release knob counterclockwise
to open the brake valve.
4 Pump the brake release pump knob.
After machine is loaded:
1 Chock wheels to prevent machine from rolling.
2 Turn the brake release knob clockwise to reset
the brakes.
Towing the Genie GS-2668 RT or the
GS-3268 RT is not recommended. If the machine
must be towed, do not exceed 2 mph (3.2 km/h).
Operator's Manual
25