First Edition · Tenth Printing
Pre-operation Inspection
o
Be sure that the operator's, safety and
responsibilities manuals are complete, legible
and in the storage container located in the
platform.
o
Be sure that all decals are legible and in place.
See Decals section.
o
Check for engine oil leaks and proper oil level.
Add oil if needed. See Maintenance section.
o
Check for hydraulic oil leaks and proper oil level.
Add oil if needed. See Maintenance section.
o
Check for engine coolant leaks and proper level
of coolant. Add coolant if needed. See
Maintenance section.
o
Check for battery fluid leaks and proper fluid
level. Add distilled water if needed. See
Maintenance section.
Check the following components or areas for
damage, modifications and improperly installed or
missing parts:
o
Electrical components, wiring and electrical
cables
o
Hydraulic hoses, fittings, cylinders and
manifolds
o
Fuel and hydraulic tanks
o
Drive motors
o
Wear pads
o
Tires and wheels
o
Engine and related components
o
Limit switches, alarms and horn
o
Nuts, bolts and other fasteners
Part No. 48735
Check entire machine for:
o
o
o
o
Genie GS-2668 RT & Genie GS-3268 RT
PRE-OPERATION INSPECTION
o
Platform entry gate
o
Beacon and alarms (if equipped)
o
Brake release components
o
Safety arm
o
Platform extension
o
Scissor pins and retaining fasteners
o
Platform control joystick
o
Generator (if equipped)
Cracks in welds or structural components
Dents or damage to machine
Be sure that all structural and other critical
components are present and all associated
fasteners and pins are in place and properly
tightened
Side rails are installed and snap pins and bolts
are fastened
Operator's Manual
13